×Note:Special provisions may be very complex. The extracts are taken from
49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.
B2 | |
---|
B8 | Packagings shall be made of nickel, stainless steel, or steel with nickel, stainless steel, lead or other suitable corrosion resistant metallic lining. Browse special provision B8 |
---|
IB1 | Authorized IBCs: Metal (31A, 31B and 31N).
Additional Requirement: Only liquids with a
vapor pressure less than or equal to 110 kPa
at 50 [deg]C (1.1 bar at 122 [deg]F), or 130
kPa at 55 [deg]C (1.3 bar at 131 [deg]F) are
authorized. Browse special provision IB1 |
---|
N41 | Metal construction materials are not authorized for any part of a packaging which is normally in contact with the hazardous material. Browse special provision N41 |
---|
N43 | |
---|
T7 | |
---|
TP3 | The maximum degree of filling (in %) for solids transported above their melting points and for elevated temperature liquids shall be determined by the following: Where: d f and d r are the mean densities of the liquid at the mean temperature of the liquid during filling and the maximum mean bulk temperature during transport respectively. Browse special provision TP3 |
---|
TP13 | |
---|